Japanese tools

Japanese handplanes 

Item nos (right to left): 

41430 – Mini Plane Oak body 42×150 mm – INR 2,200/-

41431 – 42×180 mm Mini Plane Oak body  – INR 2,500/-

Set-up and tuning services for 150mm and 180mm – INR 500/-

12521 – 50 mm Smooth Plane (Oak body)  – INR 5,500/-
Set-up and tuning services – INR 1,500/-

Japanese Chamfer Plane  

12619 – Chamfer Plane for 30, 45 & 60 degree chamfers – INR 5,000/-
Ready to use out of the box; just requires blade sharpening

Japanese rabbet plane 

41438 – 15 mm Rabbet Plane – INR 3,300/-

High-quality laminated steel blade.

Set-up and tuning services – INR 500/-

Japanese double corner rabbet plane 

41669 – Double Corner Rabbet Plane – INR 3,600/-

• High-quality carbon steel blade.
• Adjustable fence lets you cut rabbets from 3mm up to 15mm on both sides.
• Sharp and ready to use out of the box.

Available in limited quantity.

Compass plane 

Item no: 

41555 – Ebony Mini Plane No.6 Compass 18 mm – INR 4,500/-

A premium offering from Kakuri, this special plane helps you to create beautifully curved surfaces. Made of high-grade ebony wood.

Japanese chisels

Item nos (left to right): 

41923 – premium 3-piece set; red oak handle (long handle chisel) – INR 7,000/- (pictured in the box)

41922 – 3-piece set; white oak handle – INR 5,200/-

41921 – 42 mm single chisel – INR 3,500/-

Chisel set-up: Other than sharpening the blade on high grit stone, there is additional set-up required on the handle. If you want this taken care of, there is an additional charge of INR 1,000/- for a set of 3 chisels.

We get very limited stock of chisels as these come in small batches, so kindly pre-book your order!

High-end Japanese chisels yellow steel #2

Item nos (left to right): 

111405502 – Yasuki yellow steel – 6 mm – INR 3,000/-

111405503 – Yasuki yellow steel – 9 mm – INR 3,400/-

111405504 – Yasuki yellow steel – 12 mm – INR 3,800/-

111405506 – Yasuki yellow steel – 18 mm – INR 4,200/-

111405508 – Yasuki yellow steel – 24 mm – INR 4,600/-

111405510 – Yasuki yellow steel – 30 mm – INR 5,000/-

You can buy all the 6 chisels as a set for INR 22,500/-

Chisel set-up: Other than sharpening the blade on high grit stone, there is additional set-up required on the handle. If you want this taken care of, there is an additional charge of INR 2,000/- for a set of 6 chisels, INR 400/- for a single chisel.

The high-end chisels from Kakuri represent the finest in Japanese steel technology. Yasuki yellow steel #2 and Shirogami white steel #2 are considered the finest in quality and edge retention. The steel is made by Hitachi Corp and is used by some of the finest plane blade and chisel makers in Japan. These chisels are hand-forged, giving them great strength, quality, and blade finish.

We get very limited stock of chisels as these come in small batches, so kindly book your order soon!

High-end Japanese chisels white steel #2

Item nos (left to right): 

111405522 – Shirogami white steel – 6 mm – INR 4,400/-

111405523 -Shirogami white steel – 9 mm – INR 4,800/-

111405524 – Shirogami white steel – 12 mm – INR 5,200/-

111405526 – Shirogami white steel – 18 mm – INR 5,600/-

111405528 – Shirogami white steel – 24 mm – INR 6,000/-

111405530 – Shirogami white steel – 30 mm – INR 6,400/-

You can buy all the 6 chisels as a set for INR 31,000/-

Chisel set-up: Other than sharpening the blade on high grit stone, there is additional set-up required on the handle. If you want this taken care of, there is an additional charge of INR 2,000/- for a set of 6 chisels, INR 400/- for a single chisel.

The high-end chisels from Kakuri represent the finest in Japanese steel technology. Yasuki yellow steel #2 and Shirogami white steel #2 are considered the finest in quality and edge retention. The steel is made by Hitachi Corp and is used by some of the finest plane blade and chisel makers in Japan. These chisels are hand-forged, giving them great strength, quality, and blade finish.

We get very limited stock of chisels as these come in small batches, so kindly book your order soon!

Bar clamps 

Item nos: 

47742 – 180 mm Bar Clamp (Brass), 2-piece – INR 1,800/-

47743 – 240 mm Bar Clamp (Brass), 2-piece – INR 2,400/-

47744 – 300 mm Bar Clamp (Brass), 2-piece – INR 2,600/-

Bar clamps 

Item no: 

47748 – 600 mm Bar Clamp (Steel), 2-piece – INR 8,400/-

The steel bar clamps offer heavy-duty clamping in a light-weight body (850 gms per clamp). Very simple to use and easy to store.

We are currently taking pre-orders for these clamps. In case you have a bulk order of more than 10 clamps, bulk pricing can be discussed.

Honing guide 

Item no: 

4308 – KBS50 Honing Guide – used for sharpen plane blades and chisels, cast iron body, wood handle, very easy set up. – INR 6,000/-

Marking gauge 

Item no: 

41451 – 1 Blade Parallel Marking Gauge, 120 mm – INR 1,800/-

Carving knives (Kiridashi)

Item nos (left to right):

Right handed only.

13381 – KAKURI Carving Knife Bend type 12mm – INR 2,400
High-carbon steel; sharp out of the box

13760 – 18 mm Carving Knife – INR 2,400/-
High-carbon steel; sharp out of the box

41462 – 21 mm Carving Knife (Wood handle with cap) – INR 2,200/-
High-carbon steel; sharp out of the box

Carving tool 

Item nos: 

13061 – 5-piece Wood Carving Set – INR 3,000/-

• Includes a small sharpening stone in the box.
  
• Set includes: 2 gouges, 1 skew chisel, 1 flat chisel, 1 V-tool. Sharp out of the box.
  
• To be used without hammer or mallet.

Whet stones/Sharpening stone  

48089 – 220 and 1,000 Grit Combination Stone – INR 4,600/-

48090 – 1,000 and 3,000 are two individual stones in a plastic case. (Yellow and red stones) – INR 5,500/-

Stones come in a plastic case that can be used as a sharpening stand.

Whet stones/Sharpening stone  

48087 – Professional grade the best offered by Kakuri – 5000 grit- INR 10,600/-

Stone comes in a plastic case that can be used as a sharpening stand.

Whet stones/Sharpening stone  

48081 – Professional Grade the best offered by Kakuri – 400 grit INR 6,800/-

This is a excellent rough stone to repair or start first round of sharpening on new blades. Stone come in a plastic case that can be used as a sharpening stand.

Tsuboman Atoma Diamond Sharpening Stones  

Diamond stone with aluminum base – 400 grit – INR 12,000/-

Diamond stone with aluminum base – 600 grit – INR 12,000/-

Diamond stone with aluminum base – 1200 grit – INR 12,000/-

Diamond stone replacement sheet – 400 grit – INR 11,000/-

Diamond stone replacement sheet – 600 grit – INR 11,000/-

Diamond stone replacement sheet – 1200 grit – INR 11,000/-

The Atoma diamond sharpening stones are considered the best in the world. The stone comes fitted on an 8 mm thick aluminium base. Once the stone gets worn out, a new replacement sheet can be stuck on the base.

We are going to be offering replacement sheets also, which can be stuck on any ultra flat surface like float glass or granite.

We are currently taking pre-orders for the first batch.

Hammers  

Item nos (left to right): 

47715 – Octagonal Head Hammer 300 gm (Silver) – INR 3,400/-

47718 – Square Head 300 gm (Bronze) – INR 4,000/-

47709 – Square Head Hammer 300 gm (Silver) – INR 3,400/-

Japanese hammers are not just beautiful tools, they offer a very balanced feel, which makes them fun to use. They are sure to become your favorite hammer!

Unlike western hammers, even a light-weight 300 gram hammer delivers considerable energy on impact, while still keeping fatigue at bay.

Sakkiri Hammer  

47777 – Sakkiri Hammer 21 mm – INR 4,000/-

Japanese hammers are not just beautiful tools, they offer a very balanced feel, which makes them fun to use. They are sure to become your favorite hammer!

The Sakkiri hammer is especially useful for adjusting and setting up Japanese hand planes. It’s also excellent for all-round light hammering jobs.

Wooden Mallet 

14923 – Wooden Mallet – INR 2,500/-

Wooden mallet made in Japanese white oak. It’s a beautifully balanced striking tool for light to medium duty hammering work. It can also be used to adjust Japanese hand planes.

Limited stock available; we will not be offering this product again.

Hand saw 

Item no: 

41783 – Ryoba, 210 mm/8.2 inches blade length (Cork handle) – INR 3,200/-

• Cross cut teeth on one side and rip cut on the other.
• Extremely fast cutting; stiff blade that prevents bending, especially on rip cuts.
  
• Once worn out or damaged, the blade can be changed, retaining the handle.
  
• One of the most comfortable handles of any Japanese saw on the market.

Spare blades 

Item no: 

41784 – Spare blades for Ryoba 210 mm – 1,700/-

41786 – Spare blades for Ryoba 240 mm – 1,900/-

41788 – Spare blades for Ryoba 270 mm – 2,300/-

(Size upgrade for the 210 mm saw that we sell. Can be used on the same handle as the 210 mm saw.)

The 270 mm blade is a unique offering from Kakuri as no other Japanese manufacturer offers a saw in this size.

Dozuki hand saw 

Item no: 

40394 – Kakuri Dozuki saw, 150 mm blade length – INR 2,800/-

• Extremely fine, precision cutting for flawless joinery work.
  
• Heavy spine offers great balance.

Azebiki hand saw 

Item no: 

41998 – Kakuri Azebiki saw, 90 mm blade length – INR 4,200/-

The Azebiki is a specialty saw that can start a cut in the middle of a piece of wood without needing to drill any holes to start the cut. It also can be used to cut dados using a guide block. The blade has two edges – one for cutting along the grain and the other for cutting across the grain.

Precision-cut woodworking saw kit 

Item no: 

4758 – Precision-cut woodworking saw kit with 4 blades and a cherry wood handle – INR 19,000/-

This is a series of replaceable blade saws for woodworking, which are used by musical instrument makers, joiners, furniture makers, and carpenters all over the world, utilizing Japan’s unique traditional techniques. This set of blades is recommended for fine woodworking. The set includes 1 hardwood blade, 1 fine precision cut blade, 1 keyhole blade, and 1 flush cut blade.

Available on pre-order only.

Mini folding hand saw 

Item no: 

11009 – Kakuri mini-folding saw, 100 mm blade length – INR 1,800/-

• Extremely fine teeth, which results in scratchless cutting right at the surface level.
  
• Great for trimming dowels and wedges.
  
• Folds for easy storage in your tool kit.